- Double spreader rig on keel stepped main mast
- internal mainsail halyard of stainless wire with braid tails.
- Internal spinnaker and staysail halyards
- Standing rigging of 1 x 19 wire with swaged terminals
- Stainless turnbuckles
- Stainless steel chain plates carried into bulkheads
- Forestay, upper and lower shrouds of 12 mm
- Twin backstay and running backstays of 10 mm
- Trlatic stay of 6 mm (springstay)
- Slab reefing with internal reef lines and stoppers
- VHF antenna and low loss coaxial cable for VHF radio antenna
- LED Foredeck light mounted on mast at lower spreader
- LED deck lights mounted on lower spreader
- Sheets and tackle for mainsail
- Genoa sheets of yacht braid
- Mainsheet traveler on cockpit bridge deck with adjustment lines and stoppers
- Mast steps to ease access to mainsail head and halyard
- 1 Andersen 28 spinnaker halyard
- 1 Andersen 28 mainsail reefing
- 1Andersen 46 headsail halyards
- 1 Andersen 46 mainsail halyard
- 2 Lewmar 65ST genoa
- 2 Lewmar55ST spinnaker
- 1 Andersen 42ST mainsheet winch
- Winch handles (3)
|
- Single swept aft spreaders on deck stepped mizzen mast
- Slab reefing on main and mizzen with internal reef lines and stoppers
- internal halyards of stainless wire with braid tails.
- Wiring conduit and compression post below
- 8 mm uppers and double lower shrouds
- VHF/AIS antenna and low loss coaxial cable for VHF radio antenna with thru-deck fitting
- LED cockpit floodlight mounted on mast at lower spreader
- Sheets and tackle for mizzen sail
- Mast steps to ease access to mizzen sail head and halyard
- 1Andersen 10 mizzen sheet and reefing
- 1Andersen 28 mizzen sail and mizzen staysail halyard
|
